5.6W Endurance Makeblock engraving and cutting machine
8W Endurance DIY engraving and cutting machine
Endurance Makeblock engraving machine is a necessary solution for those who need a big coordinate table 31×39 cm (12×16») with the functions of a plotter and laser cutter/engraver.
Endurance DIY is a universal solution both for home and small enterprises usage, such as souvenirs engraving and stamps making.
As one of the most beautiful kinds of modern art, I would single out, perhaps, engraving on glass. Thin lines on a glass surface, coupled with beautiful lighting can produce a stunning effect.
Any other way of engraving will not help. Neither will do a CNC machine nor any chemical (relatively safe) process as the glass is a chemically inert material.
Theoretically, the glass melting temperature ranges from 400 to 900C. In practice, it is not possible in some cases to determine the composition or melting temperature of a glass sample in advance without the full specification of the glass preform.
According to our calculations, a 0.1 mm laser beam of a 3.5 W laser can give the temperature of about 400-500C at its focal point.
A 5.6 W diode laser with 0.1 mm grain will give the temperature of 500-650 C at the focal point of the beam.
For this reason, we have create a a more powerful laser with 8W power output.
Subscribe on our Youtube channels
There is one trick: we need to put an underlying surface under the glass. We use ordinary black vinyl. It is practically non-combustible and does not form solid combustion products. The black vinyl film heats up and heats the glass, engraving the glass surface.
We turn on the laser and watch the process.
At the end we carefully wipe the glass!
Enjoy engraving with us! Don’t hesitate to contact us if you feel we’ve missed something.
Learn more about Endurance Makeblock laser engraving / cutting machine
Learn more about Endurance DIY laser engraving / cutting device
Learn more about Endurance WanHao combo unit: 3D printer + laser engraver + laser cutter