Now you have an opportunity to buy a perfect laser engraving and cutting machine combined with a 3D printer.
2.1W (2100 mW) / 3.5W (3500 mW) / 5.6W (5600 mW) / 8W (8000 mW) / 8.5W (8000 mW) / 10W (10000 mW) lasers are available on board! With Endurance WanHao combo you can easily and quickly engrave, make markings and inscribed gifts.
The Endurance laser engraving and cutting device with installed on a 3D printer WanHao DuPlicator i3 will turn your working place into a mini engraving workshop.
So, you can cut and engrave almost on any surface.
|Laser cut *:||Laser engraving:|
Acrylic (depends on a laser power)
Wood (depends on a laser power)
Plywood (depends on a laser power)
Aluminum (depends on a laser power)
Create your own PCB
* If you are not sure ask us about material if our laser cutting / engraving machine can cut it or not
The Duplicator i3 is sensitive to electrostatic discharge. Make sure you don't have a static charge on you by touching a grounded object before operating The Duplicator i3 or attempting any adjustments. If opening the Duplicator i3 for service, ensure that the power supply is turned off and the cord is disconnected.
The Duplicator i3 will now guide you through initial setup and your first print. You should see a WANHAO LOGO on the LCD screen. 2.2
There is one black aluminum button beside the LCD screen. Turn and push to navigate and make selections.
Then this guide will help you to level the platform, load filament, and start a test print.
Follow the following instructions to set up your Duplicator i3 for the first time! And remember, if anything goes wrong, or things aren't happening the way this guide says they should, check out the Troubleshooting page or get in touch with Support.
Leveling Your Platform
Pay close attention: leveling your platform is very important to print quality!
First navigate to Quick Setting---Home All. The extruder should move to left bottom side of printer.
Color Print Speed: 100mm/s
Model Number: Endurance WANHAO Duplicator I3
Structure Material: full metal frame
Printing Filament: ABS and PLA
Filament Diameter: 1.75mm
File Format: STL,G-Code
Z Axis Positioning Accuracy: 0.004mm
XY Axis Positioning: 0.012mm
Extruder diameter: 0.4mm (customized 0.3mm/0.5mm)
Max Paper Size: 200*200*180mm
Print Speed: 40-100 mm/s
|Power output||2.1W (2100 mW) / 3.5W (3500 mW) / 5.6W (5600 mW) / 8W (8000 mW) / 8.5W (8500 mW)/ 10W (10000 mW)|
|Maximum engraving speed||0.8 - 2 inch / sec|
|Maximum cutting speed (0.04 inch of a cardboard)||0.1 - 0.25 inch / sec|
|Maximum cutting depth (plywood)||0.1 - 0.3 inch|
|Maximum cutting depth (acrylic)||0.1 - 0.2 inch|
|The maximum height of the workpiece||not more than 8 inch|
|Maximum cutting / engraving area||8 X 8 inch|
|The accuracy of engraving (grain)||0.004 inch|
|Compatible software||Cura, Repieter host|
|Lifetime||More than 1000 hours|
|Operating conditions||-20 C - +40 C|
|Power input||110 / 220 Volts|
|Average energy consumption||~30-50W|
|Dimensions (W x D x H)||15 X 15 X 15 inch|
|The weight||~ 30 pounds|
|Mount||Does not require|
|Focal length||1 - 4 inch|
|Features||Combo: 3D printer, laser engraver and laser cutter. Three in one|
|Limitations||Can not cut transparent, ceramic and metalic things|
|Average delivery pricing||50-80$ world wide shipping|