Description
The C series CO2 laser power supply is a kind of adjustable power supply for laser cutting and engraving machines. C-series power supplies are the most stable power supplies available. It provides accurate control of small currents, which effectively solves the problem of the instability of the conventional power supply at 6mA and the inability to control the laser. It is specially designed for laser technology manufactured by CMA Yueming. DB9 standard interface, it is controlled by analog signals 0~3.3V or PWM, can widely use CO2 laser tubes of most other manufacturers.
2. Fully adapted to the wide input voltage range AC90-264V, 50/60Hz, with active PFC function, achieves higher power factor, effectively resists the effect of large changes in mains voltage on the output current.
3. Autonomous LCD digital display allows you to control the output indication light, output light, protection signal, water, can indicate normal and faulty signal, built-in potentiometer can manually adjust the current. The size of the mounting hole for the digital LCD display is the same as the original version of the current meter, i.e. no additional installation required. This laser power supply has TTL signal indication, can quickly determine whether the laser tube is damaged or the laser power supply is damaged, greatly facilitating on-site maintenance.
4. The power supply meets a high level of security: it has an open circuit protection function, which greatly extends lamp life, simple laser power control can be controlled by 0~5V analog signal, or can also be controlled by 5V PWM signal. The power supply has a “TEST” button, which can manually test the output laser, and can also be used to test the working current of the laser tube.
All products pass ISO9001 and CE quality certification
Aging testing is carried out at the factory. Each power supply undergoes pre-sales aging testing at 65°C under full load conditions for 10 hours and cycled on/off 300 times within 7 seconds
Model | C150-Y3 |
| Rated power of the laser tube, W | 120-150 W | Input voltage | 220/110 V |
| AC supply frequency current | 47-440Hz |
| Maximum input current | 3.5 A |
| Maximum input power | 750 W |
| Leakage current | ≤0.7mA (AC220V) ≤0.4mA (AC110V) |
| Maximum output voltage | DC 50 kV |
| Maximum output current | DC 38 mA |
| Performance | 90% |
| Responsiveness/performance | less than 1 ms |
| Protection | momentary shutdown (when there is a good ground)< /td> |
| Voltage resistance | in-out, in-body: AC1500V 1min ≤10mA |
| Cooling | forced, air (built-in fan) |
| Operating temperature, deg | -10 ℃～ +40 ℃ |
| Relative humidity | up to 90% (non-condensing) |
| Time Between Failures (MTBF) | at least 10000 hours |
Dimensions LxWxH | 328 * 239 * 101mm |
Reviews
There are no reviews yet.