Description
Universal milling and engraving machine with a working field size for most production operations when processing the main standard sizes of workpieces. Produces engraving on virtually any material: wood, plastic, aluminum, bronze, brass, glass, artificial stone, granite. Differs in simplicity, at the same time it has high-quality cutting, long service life and minimum maintenance.
Structurally: a welded steel frame, round guides along the axes, ball screws driven by stepper motors, a table made of a durable duralumin profile with protective plastic pads, a high-speed water-cooled spindle motor, the spindle is equipped with a collet clamp of the ER11 standard, the machine has connection to a computer via the PCI interface, using a board inserted into the PC. Supported firmware: Type3? ArtCAM, Wentai
Model < /strong> | S6090 |
Spindle working area (XYZ), mm | 600х900х100 < /p> |
Repeating | 0.02 |
Spindle motor power, kW | 1,5 |
| Tool shank diameter, mm < /td> | 3-6 / ER11 |
Spindle speed range, rpm min | 600-24000 |
Spindle cooling | water |
| < p>Maximum travel speed, m/min | 9 |
stepper motors, ballscrews, round rails | |
| Control System | NC Studio /or DSP* |
Data Format | G-code; *.u00; *.mmg; *.plt |
Package dimensions, mm | 1530x1300x1600 |
Connection, V/Hz | AC110~220V±10%/50~60Hz |
200 /280< /p> |
Options
Single-spindle machine with built-in control unit and connecting power cable;
NC Studio control system PCI board with connecting cable to computer,
Spindle water cooling kit: tank, pump, hoses;
Adjustment tool and work (set of milling cutters, collets 6mm and 3.175mm, clamps, keys, in general case);
Demo software;
User manual (CD in English)
Reviews
There are no reviews yet.