Description
Stepper motor 86HS45 – 4.5 Nm 2 phase NEMA 34
The 86HS45 two-phase stepper motor is suitable for a wide range of applications. With 8 outputs, the motor can be connected in several different ways /see table/.
| Angle pitch | deg | 1.8 | ||
| Flange size | mm / NEMA | 86 / 34< /strong> | ||
| Shaft diameter | mm | 12.7 | ||
| Number of pins | | 8 | ||
| Type of connection | | Bipolar Parallel | Bipolar Serial | Unipolar |
| Hold Torque | 4.5 | 4,5 | 3,2 | |
| Phase current | A | 6,0 | 3,0 | 4.2 |
| Wiring resistance | Ohm | 0.375 | 1.5 | 0.75 | mH | 3, 4 | 1.4 | 3,4 |
| Insulation resistance | MΩ | 100 (at 500VDC) | ||
| Angular pitch error | % | 5 (w/load) | ||
| Wind resistance error | % | 10 | ||
| Inductance error | % | 20 | ||
| Max axis shaft runout | mm | 0.08 (c load .450g) | ||
| Maximum shaft radial runout | mm | 0.06 (with load 450g) | ||
| Rotor moment of inertia | g/cm | 1300 | ||
| Operating temperature range | c | -10 ..+50 | ||
| Max motor heating | gr C | 80 | ||
| Weight | kg | 2,3 | ||
| Basic dimensions ry | mm | 112x86x86 | ||
Reviews
There are no reviews yet.