Description
It engraves products made of soft and hard wood, chipboard, MDF, hardboard, PVC, getinaks, artificial stone, combined materials. Differs in simplicity and wide applicability. It has quality cutting, long service life and minimal maintenance. The size of the machine is selected as one of the most suitable for most production operations when processing the main standard sizes of workpieces.
Structurally: Desktop version with a welded steel frame, round guides along the axes, ball screws driven by stepper motors, a table made of a durable duralumin profile with protective plastic pads, a high-speed spindle motor with water or air cooling, the spindle is equipped with an ER standard collet clamp for mounting tools with shank diameters 3.175-12mm. Stepper motors on each axis, controlled either by a computer with an NCStudio system interface, or via an installed DSP box that has a USB interface for reading data directly from a flash memory and also provides interactive direct control of the machine. The controller has the functions of remembering the state when the work is interrupted, storing several programs in the memory, the last point of processing, etc. cylindrical workpiece surfaces
| Model | TST-6090Y |
| Spindle working area (XYZ), mm | 600x900x100 |
| Resolution, mm | 0.005 |
| 1,5 | |
| Spindle speed range, rpm | 24000 / 18000 |
| Spindle cooling | Water / Air |
| Maximum travel speed, m/min | 5,5 |
| Axis drive type | stepper motors, ball screws, round rails |
| Ucancam V8 / Type3 / Artcam | |
| Data Format | G code *.u00; *.mmg; *.plt. |
| Control / interface | NCStudio /PCI or DSP / USB |
| Main dimensions, mm | 720х1150х850 |
| Packed dimensions, mm | 750x1200x900 |
| Connection, V/Hz | AC220V/50Hz |
| Net/gross machine weight, kg | 150/180 |
Options
Machine,
NCStudio PCI control board with interface for connection to the machine,
Water cooling system kit for water cooling spindle (pump, connecting tubes, tank),
Tool for setting up and working (set of milling cutters, fasteners / clamps, keys, brush in a common case),
Clamps: 4 pieces
Milling cutters: 8 pieces
NCStudio software /demo version/,
instructions for operating and setting up the machine
Cables for connection to the network and to the computer
Reviews
There are no reviews yet.